Digi IX20-WAG4 User Manual page 212

Table of Contents

Advertisement

Wi-Fi
See
Isolate Wi-Fi clients
access points from communicating with each other.
8. Set the IP address or hostname of the RADIUS server:
(config)> network wifi ap digi_ap encryption host_wpa2 hostname
(config)>
9. Set the secret key as configured on the RADIUS server:
(config)> network wifi ap digi_ap encryption key_wpa2 secret_key
(config)>
10. (Optional) Set the RADIUS server's port. The default is 1812.
(config)> network wifi ap digi_ap encryption port_wpa2 port
(config)>
11. (Optional) Set the amount of time to wait before changing the group key.
The group key is shared by all in clients of the access point, and after a client has
disconnected, it will be able to use the group key to decrypt broadcast packets until the key is
changed.
(config)> network wifi ap digi_ap encryption group_rekey value
(config)>
where value is any number of days, hours, minutes, or seconds, and takes the format number
{d|h|m|s}.
For example, to set group rekey interval to ten minutes, enter either 10m or 600s:
(config)> network wireless ap digi_ap encryption group_rekey 600s
(config)>
Increasing the time between rekeys can improve connectivity issues in noisy environments. To
disable group rekeys, set to 0. This will allow any client that has previously connected to see
all broadcast traffic on the wireless network until the Wi-Fi radio is restarted. The default is 10
minutes.
1. Assign the Wi-Fi access point to a LAN interface or to a bridge. See
Configure a bridge
The access point must be assigned to an active LAN, or a bridge that is assigned to an active
LAN.
2. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
IX20 User Guide
Configure a Wi-Fi access point with enterprise security
for information about how to prevent clients connected to different
for more information.
Configure a LAN
and
212

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ix20

Table of Contents