Table of Contents
Advertisement
Services
13. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
14. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Download MIBs
This procedure is available from the WebUI only.
Required configuration items
Enable SNMP.
n
To download a .zip archive of the SNMP MIBs supported by this device:
WebUI
1. Log into the IX20 WebUI as a user with Admin access.
2. Enable SNMP.
See
Configure Simple Network Management Protocol (SNMP)
and configuring SNMP support on the IX20 device.
3. On the main menu, click Status. Under Services, click SNMP.
Note
If you have recently enabled SNMP and the SNMP option is not visible, refresh your
browser.
The SNMP page is displayed.
4. Click Download.
IX20 User Guide
Simple Network Management Protocol (SNMP)
for information about enabling
444
Advertisement
Table of Contents
