Table of Contents
Advertisement
System administration
b. Reboot the device:
Update firmware from a local file
WebUI
1. Download the IX20 operating system firmware from the Digi Support FTP site to your local
machine.
2. Log into the IX20 WebUI as a user with Admin access.
3. On the main menu, click System. Under Administration, click Firmware Update.
4. Click Choose file.
5. Browse to the location of the firmware on your local file system and select the file.
6. Click Update Firmware.
Command line
1. Download the IX20 operating system firmware from the Digi Support FTP site to your local
machine.
2. Log into the IX20 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
3. Load the firmware image onto the device:
> scp host hostname-or-ip user username remote remote-path local local-
path to local
where:
hostname-or-ip is the hostname or ip address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the path and filename of the file on the remote host that will be copied
n
to the IX20 device.
local-path is the location on the IX20 device where the copied file will be placed.
n
IX20 User Guide
Firmware update completed, reboot device
>
> reboot
Update system firmware
>
692
Advertisement
Table of Contents
