Table of Contents
Advertisement
Wi-Fi
3. Click Network > WiFi > Access points.
4. Create a new access point or modify an existing access point:
To create a new access point, for Add WiFi access point:, type a name for the access
n
point and click .
To modify an existing access point, click to expand the access point.
n
The Wi-Fi access point configuration window is displayed.
5. For SSID, type the SSID. Up to 32 characters are allowed.
6. Enable SSID broadcast to configure the radio to broadcast the SSID.
7. (Optional) Enable Isolate clients to prevent clients that are connected to this access point
from communicating with each other. See
prevent clients connected to different access points from communicating with each other.
8. For Encryption, select one of the following:
Open (Unencrypted) No encryption is used.
n
WPA3 Enhanced Open (OWE) Uses Opportunistic Wireless Encryption (OWE)
n
technology to provide encryption for Wi-Fi networks that do not use password
protection.
Note
connecting to this device will have WPA3 capabilities.
9. (Optional) For Group rekey interval, type the amount of time to wait before changing the
group key.
IX20 User Guide
Only select WPA3 Enhanced Open (OWE) if you know that all Wi-Fi clients
Configure an open Wi-Fi access point
Isolate Wi-Fi clients
for information about how to
195
Advertisement
Table of Contents
