Digi IX20-WAG4 User Manual page 37

Digi IX20 hardware reference
6. Create a policy:
(config firewall qos 2)> add policy end
(config firewall qos 2 policy 0)>
7. Add a rule to the policy:
(config firewall qos 2 policy 0)> add rule end
(config firewall qos 2 policy 0 rule 0)>
The default settings for the policy and rule are sufficient.
8. Save the configuration and apply the change:
(config firewall qos 2 policy 0 rule 09)> save
Configuration saved.
>
9. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
IX20 User Guide
Configuration for extreme thermal conditions
37