Table of Contents
Advertisement
Diagnostics
Analyze network traffic
The IX20 device includes a network analyzer tool that captures data traffic on any interface and
decodes the captured data traffic for diagnostics. You can capture data traffic on multiple interfaces
at the same time and define capture filters to reduce the captured data. You can capture up to 10 MB
of data traffic in two 5 MB files per interface.
To perform a more detailed analysis, you can download the captured data traffic from the device and
view it using a third-party application.
Note
Data traffic is captured to RAM and the captured data is lost when the device reboots unless you
save the data to a file. See
This section contains the following topics:
Configure packet capture for the network analyzer
Example filters for capturing data traffic
Capture packets from the command line
Stop capturing packets
Show captured traffic data
Save captured data traffic to a file
Download captured data to your PC
Clear captured data
IX20 User Guide
Save captured data traffic to a
Analyze network traffic
file.
779
788
789
790
791
792
793
794
778
Advertisement
Table of Contents
