Digi IX20-WAG4 User Manual page 136

Interfaces
----------
enable
metric
mgmt
mtu
prefix_id
prefix_length
type
weight
Additional Configuration
---------------------------------------------------------------------
----------
connection_monitor
dhcpv6_server
(config network interface my_lan)>
View default settings for the IPv6 DHCP server:
(config network interface my_lan)> ipv6 dhcpv6_server ?
DHCPv6 server: The DHCPv6 server settings for this network interface.
Parameters
---------------------------------------------------------------------
----------
enable
(config network interface my_lan)>
d. Modify any of the remaining default settings as appropriate. For example, to change the
minimum length of the prefix:
(config network interface my_lan)> ipv6 prefix_length 60
(config network interface my_lan)>
If the minimum length is not available, then a longer prefix will be used.
See Configure WAN/WWAN priority and default route metrics
metrics.
(Optional) Configure the MAC address deny list.
Incoming packets will be dropped from any devices whose MAC addresses is included in the
MAC address denylist.
a. Add a MAC address to the denylist:
(config network interface my_lan)> add mac_denylist end mac_address
(config network interface my_lan)>
where mac_address is a hyphen-separated MAC address, for example, 32-A6-84-2E-81-58.
b. Repeat for each additional MAC address.
IX20 User Guide
true Enable
0 Metric
0 Management priority
1500 MTU
1 Prefix ID
48 Prefix length
prefix_delegation Type
10 Weight
Active recovery
DHCPv6 server
Current Value
true Enable
Local Area Networks (LANs)
for further information about
136