Configure An Openvpn Client By Using An .Ovpn File - Digi IX20-WAG4 User Manual

Virtual Private Networks (VPN)

Configure an OpenVPN client by using an .ovpn file

Required configuration items
Enable the OpenVPN client.
n
The OpenVPN client is enabled by default.
The firewall zone to be used by the OpenVPN client.
n
Additional configuration items
The route metric for the OpenVPN client.
n
The login credentials for the OpenVPN client, if configured on the OpenVPN server.
n
See Configure SureLink active recovery for OpenVPN

WebUI
1. Log into the IX20 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > OpenVPN > Clients.
4. For Add, type a name for the OpenVPN client and click .
The new OpenVPN client configuration is displayed.
IX20 User Guide
for information about OpenVPN active recovery.
OpenVPN
351