Table of Contents
Advertisement
Virtual Private Networks (VPN)
n
n
d. Set the IP address and optional netmask of the remote network. The keyword any can also
be used.
(config vpn ipsec tunnel ipsec_example policy 0)> remote network value
(config vpn ipsec tunnel ipsec_example policy 0)>
19. (Optional) You can also configure various IPsec related time out, keep alive, and related values:
a. Change to the root of the configuration schema:
(config vpn ipsec tunnel ipsec_example policy 0)> ...
(config)>
b.
(config)> vpn ipsec advanced ?
Advanced: Advanced configuration that applies to all IPsec tunnels.
Parameters
---------------------------------------------------------------------
----------
ike_retransmit_tries
keep_alive
Additional Configuration
---------------------------------------------------------------------
----------
connection_retry_timeout
connection_try_interval
ike_timeout
(config)>
Generally, the default settings for these should be sufficient.
IX20 User Guide
ii. Set the interface. For example:
(config vpn ipsec tunnel ipsec_example policy 0)> local
network eth1
(config vpn ipsec tunnel ipsec_example policy 0)>
custom: A user-defined network.
Set the custom network:
(config vpn ipsec tunnel ipsec_example policy 0)> local custom
value
(config vpn ipsec tunnel ipsec_example policy 0)>
where value is the IPv4 address and optional netmask. The keyword any can also
be used.
request: Requests a network from the remote peer.
Current Value
5
IKE retransmit tries
40s
NAT keep alive time
Connection retry timeout
Connection try interval
IKE timeout
IPsec
313
Advertisement
Table of Contents
