Table of Contents
Advertisement
Firewall
1. Log into the IX20 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Firewall > Custom rules.
4. Enable the custom rules.
5. (Optional) Enable Override to override all preconfigured firewall behavior and rely solely on
the custom firewall rules.
6. For Rules, type the shell command that will execute the custom firewall rules script.
7. Click Apply to save the configuration and apply the change.
Command line
1. Log into the IX20 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
IX20 User Guide
Configure custom firewall rules
662
Advertisement
Table of Contents
