Table of Contents
Advertisement
Interfaces
1. Log into the IX20 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Create the WAN or select an existing WAN:
To create a new WAN, for Add interface, type a name for the WAN and click .
n
To edit an existing WAN, click to expand the WAN.
n
The Interface configuration window is displayed.
New WANs are enabled by default. To disable, click Enable.
5. For Interface type, leave at the default setting of Ethernet.
6. For Zone, select External.
7. For Device, select an Ethernet device, a Wi-Fi client, or a bridge. See
information about bridging.
8. (Optional) Click to expand 802.1x to configure 802.1x port based network access control:
a. Click to expand Authentication.
b. Click Enable server to enable a 802.1x authentication server.
c. Set the Reauth period.
IX20 User Guide
Wide Area Networks (WANs)
Bridging
for more
108
Advertisement
Table of Contents
