Table of Contents
Advertisement
OPTIONS AND ATTACHMENTS
Consult your Windrower dealer for details on
the
following:
NOTE:
If not factory ordered, installation of these
options and
attachments is to be done by Wind-
rower dealer.
Self-Cleaning Air
Intake
Screen
This automatic screen cleaning device "vacuums•
the screen by means of two rotors.
Forked Tail-Wheel
Casters
Optional to formed casters, the forked tail-wheel
casters are available for 9.SL
-
14 tires or for
16.SL
-
16.1 tires.
Engine Tachometer
SELF-CLEANING AIR INTAKE SCREEN
FORKED CASTER
OPTION
Mounted at the bottom of the machine monitor panel to the right of the operator, the tachometer
indicates
engine speed in revolutions per minute
(RPM).
Header Hydraulics Field
Conversion Packages
REEL LIFT
/CONVEYOR
SPEED
CONVERSION PACKAGE
This package converts a tractor which was factory configured specifically for use with an Auger Header
for use with a header with
hydraulically
controlled reel height and conveyor speed (Multi-Crop or Harvest
Headers).
HEADER
ATTITUDE
CONTROL
CONVERSION PACKAGE
This package adds the header attitude
,cut
height•)
control to
the existing hydraulic package. This allows
the operator to vary cut height from one side of the header to the other. Uses of this control
include:
•
·Return to cut
height•.
Allows setting the
cut
height
independent
of header height control.
•
Allows varying cut height without changing cutterbar angle.
•
Levelling the
header.
(Useful with Triple Delivery Harvest
Headers where differences in deck weight can
cause one side of the header to be lower.
• Saw-tooth stubble, commonly used as a snow trap.
• Finishing off a narrow strip of field without disturbing other windrows.
127
Advertisement
Table of Contents
