Table of Contents
Advertisement
3.3 Installing Caster Wheels
The windrower's caster wheels may have been shipped removed from the windrower. They will need to be installed now.
If the caster wheels are already installed, proceed to
DANGER
Ensure that all bystanders have cleared the area.
1 1
2
1
Figure 3.8: Parts Required for Caster Wheel Installation
1. Clear all bystanders from the area.
2. Retrieve both caster wheels (1). Make sure each wheel spindle has three washers (2). Remove and retain one washer
from each caster wheel.
3. Retrieve the remaining parts from the tool box:
• Two keys (MD #135296) (3)
• Anti–shimmy arm is shipped assembled for RIGHT side of the walking beam (4)
• Anti–shimmy arm is shipped assembled for LEFT side of the walking beam (5)
262175
ASSEMBLING WINDROWER
3.4 Installing Drive Wheels, page
3
4
5
23
26.
Revision A
Advertisement
Table of Contents
