Table of Contents
Advertisement
3. Using a forklift, lift the cab end of the windrower
approximately 130 cm (51 in.) off of the ground to remove
cribbing (A) or the stands that support the windrower.
4. Lower the windrower to the ground.
5. Remove the wheel chocks from both caster wheels.
6.15.9 Caster Wheels
The casters wheels' tire pressure, wheel nut torque, and the anti-shimmy dampeners should be inspected regularly.
Installing Forked Caster Wheel
The caster wheel will need to be attached to the axle assembly before it can be installed on the windrower.
1. Position axle assembly (B) into wheel (C) and secure it with
wheel nuts (A).
262171
MAINTENANCE AND SERVICING
Figure 6.235: Windrower on Stands
Figure 6.236: Caster Wheel Assembly
427
B
C
A
A
Revision A
Advertisement
Table of Contents
Troubleshooting
