Every 1000 Hours; Removing And Installing The Fuel Tank Vent Filter - MacDon M1170 Operator's Manual

5.12 Every 1000 Hours

Complete the following maintenance tasks every 1000 hours of operation.
• Change fuel tank vent filter. Refer to
• Clean DEF supply module filter. Refer to
• Change wheel drive lubricant. Refer to

5.12.1 Removing and Installing the Fuel Tank Vent Filter

The fuel tank is vented by a hose and filter in the platform rail. Change the filter every 1000 hours or annually, whichever
occurs first.
Change the filter as follows:
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator's seat for any reason.
WARNING
To avoid personal injury or death from explosion or fire, do NOT smoke or allow flame or sparks near windrower when
servicing.
1. Stop the engine and remove the key.
2. Remove two bolts (A) and plate (B) on the right service
platform.
3. Release hose tension clamps (A) and slide away from
filter (B).
4. Pull hoses off filter (B) and remove filter.
214733
MAINTENANCE AND SERVICING
5.12.1 Removing and Installing the Fuel Tank Vent Filter, page
5.12.2 DEF Supply Module Filter, page
5.6.7 Changing Wheel Drive Lubricant, page
329
331.
282.
Figure 5.113: Right Service Platform
B
A
Figure 5.114: Fuel Tank Vent and Filter
329.
B
A
Revision A