Table of Contents
Advertisement
11. Once the calibration completes all nine stages, the
calibration is complete. The message CALIBRATING
COMPLETED appears. Select X icon (A) to leave the page.
5.6.2 Calibrating Header Position Sensors on HarvestTouch
The header position sensors need to be recalibrated whenever the HarvestTouch
replaced, sensor readouts are erratic, a pump has been replaced, or when a new header type or attachment is connected
to the windrower.
DANGER
Ensure that all bystanders have cleared the area.
NOTE:
This calibration MUST be performed with the engine running and the header engaged.
1. Clear all bystanders from the area.
2. Start the engine.
3. Engage the header.
NOTE:
Once the header is engaged, header gauges (A) will appear
™
on the HarvestTouch
4. Select MENU (B) icon.
262175
ATTACHING HEADERS TO WINDROWER
Display home page.
Figure 5.297: Calibration Page
™
Display is replaced, a position sensor is
Figure 5.298: HarvestTouch
231
™
Display
A
™
Display
A
B
Revision A
Advertisement
Table of Contents
