Freq Channel; Marker; Calculate:obwidth:marker[1]|2|3|4:Mode Off|Position|Delta; Calculate:obwidth:marker[1]|2|3|4:Mode - Agilent Technologies N1996A-503 User Reference

Preset
Key Path
Restart, Single, Cont
The sweep control functionality is shared across all the Modes. See the
page 98 section for details about how they operate.

FREQ Channel

The frequency/channel functionality is shared across all the Modes. For details about how
it operates, see "FREQ Channel" on page 38

Marker

Accesses the marker control keys which select the type and number of markers and turns
them on and off. Markers are diamond-shaped characters that identify points of traces. Up
to four pairs of markers may appear on the display simultaneously; only one pair can be
controlled at a time. The marker that is controlled is called the "active" marker. Pressing
Marker activates the Normal menu key.
Marker
Selects one of four possible markers. A marker that has already been turned on will
become active when it is selected. If a marker has been turned on and assigned to a specific
trace, it will become active on that trace if that marker is selected.
Mode
State Saved
Key Path
Marker Type
Sets the marker type to normal or delta.
Mode
Remote Command
Chapter 3
The default value is auto-calculated. This default value will
depend upon the span of the analyzer, which could be either
2.9999 GHz or 5.9999 GHz
N/A - Remote Feature Only
SA
Saved in State
Front-panel key
SA

:CALCulate:OBWidth:MARKer[1]|2|3|4:MODE

OFF|POSition|DELTa
:CALCulate:OBWidth:MARKer[1]|2|3|4:MODE?
Occupied Bandwidth Measurement
"Control/Sweep" on
Mode
99