[:Sense]:Acpower:average:tcontrol Exponential|Maxhold|Repeat|Rmaxhold; [:Sense]:Acpower:average:tcontrol - Agilent Technologies N1996A-503 User Reference

Default Unit
Meas
Meas
This key displays a menu that lets you to make one-button measurements such as
the adjacent channel power measurement. In the Channel Analyzer mode, Adjacent
Channel Power is the default measurement. This default allows you to make immediate
measurements using the current default setup. You can change settings as required for
your unique measurement.
Settings can be changed using the functions under the Meas Setup key (see
on page 135).
Mode:
Key Path
Meas Setup
Accesses the settings that can be selected for the ACP measurement. The ACP
measurement must be selected to access these features. Press
measurement.
Mode:
Key Path
Avg Mode
Sets the type of termination control used for the averaging function. This determines the
averaging action after the specified number of measurements has been reached (see
Number" on page 137).
Mode
Remote Command
Example
Chapter 3
Hz
All
Front-panel key
Channel Analyzer
Front-panel key
Channel Analyzer

[:SENSe]:ACPower:AVERage:TCONtrol

EXPonential|MAXHold|REPeat|RMAXhold
[:SENSe]:ACPower:AVERage:TCONtrol?
ACP:AVER:TCON EXP
Adjacent Channel Power—ACP (I&M) Measurement
Meas ACP (I&M)
,
Mode
"Meas Setup"
to select the
"Avg
135