Agilent Technologies N1996A-503 User Reference page 42

Mode
Meas Off (Spectrum Analyzer) Measurement
Dependencies / Couplings
Remote Command Notes
Preset
State Saved
Range
Key Path
Default Unit
Channel Step
Sets the channel step size.
Mode
Dependencies /
Couplings
State Saved
Range
Key Path
Units
Sets the Freq Channel menu to display the parameters with either Frequency values
(Freq) or with Channel values (Chan).
Notes
Remote Command
Notes
Preset
Range
42
Span, RBW, Center Frequency
When auto-coupled in a non-zero span, the center frequency
step size is set to 10% of the span. When auto-coupled in zero
span, the center frequency step size is set to the RBW value.
Not displayed on front-panel when
The default value provided below is valid only in the Frequency
Domain. In Time Domain, the default CF Step will be equal to
the RBW.
Freq Step Auto = (Stop Freq - Start Freq) /10
Saved in State
1 Hz to 2 GHz
FREQ Channel, CF Step
Hz
Channel Analyzer
Not displayed on front-panel when
Saved in instrument state.
1 to 100
FREQ Channel, Channel Step
This Units parameter is a Front Panel parameter only.
No SCPI command. Front Panel only.
Freq
Freq | Chan
Units Chan
is set to .
Units Chan
is set to .
Chapter 3