Agilent Technologies N1996A-503 User Reference page 238

Mode
Distance To Fault
Min
Max
Key Path
Default Unit
1st Segment
Sets the state of the first segment to On or Off. This key is available only when
Segments
with the key.
Mode
Notes
Dependencies /
Couplings
Preset
State Saved
Range
Key Path
1st Segment (Left or Right Limits)
238
0 m (if Unit is Meters)
0 ft. (if Unit is Feet)
304.8 m (if Unit is Meters)
1000 ft. (if Unit is Feet)
Meas Setup, Limit Masks, Limit Mask 1, Center Segment Span
m (meters) if the "Unit" parameter is set to "Meter"
ft. (feet) if the "Unit" parameter is set to "Feet"
Stimulus / Response
Key is only displayed when the selected segment is 1
nd
If Off the 2 limit mask segment will not be displayed even if
turned On.
If On and the Center segment is On:
st
The left hand side 1 segment is drawn to the left hand side of
the center segment at the specified power level
st
The right hand side 1 segment is drawn to the right hand side
of the center segment at the specified power
st
For both left and right 1
nd
If the 2 segment is Off the 1
limit mask span is equal to the current frequency span.
nd
If the 2 segment is On the left and right 1
specified span values.
Off
Saved in instrument state.
On | Off
Meas Setup, Limit Masks, Limit Mask 1, 1st Segment
1st
has been selected
segments when On
st
segment extends so the total
st
segments use the
st
.
Chapter 3