Ese - Agilent Technologies N1996A-503 User Reference

Standard Event Status Enable
Selects the desired bits from the standard event status enable register. This register
monitors I/O errors and synchronization conditions such as operation complete, request
control, query error, device dependent error, status execution error, command error and
power on. The selected bits are OR'd to become a summary bit (bit 5) in the byte register
which can be queried.
The query returns the state of the standard event status enable register.
Mode
Remote Command
Example
Remote Command
Notes
Preset
Min
Max
SCPI Status Bits/OPC
Dependencies
Chapter 7
IEEE and STATus Commands (Remote Commands Only)
All modes

*ESE

*ESE?
*ESE 36 Enables the Standard Event Status Register to
monitor query and command errors (bits 2 and 5).
*ESE? Returns a 36 indicating that the query and command
status bits are enabled.
For related commands, see the STATus subsystem and
SYSTem:ERRor[:NEXT]? commands.
255
0
255
Event Enable Register of the Standard Event Status Register.
Standard Event Status Enable
345