Spectrum Analyzer - Agilent Technologies N1996A-503 User Reference

Mode

Spectrum Analyzer

Spectrum Analyzer
Selects the Spectrum Analysis measurement mode for your analyzer. This mode allows you
to make all your measurements specifying your unique setup requirements. The Spectrum
Analysis mode defaults to measurement off status. In addition, you may use the
to select one-button measurements such as, Occupied BW (Occupied Bandwidth).
Remote Command
Example
Preset
Key Path
Mode
Remote Command
Example
28
:INSTrument:SELect SA
:INSTrument:SELect?
INST:SEL SA
SA
Mode, Spectrum Analyzer
All
:CONFigure:<meas_name>
:CONFigure?
:CONFigure:<meas_name>:NDEFaults
CONF:OBW — selects the Occupied Bandwidth measurement and
sets the instrument settings to the factory defaults.
CONF? — returns the current measurement name
CONF:OBW:NDEF — selects the Occupied Bandwidth
measurement without setting the instrument settings to the factory
defaults.
Meas
key
Chapter 3