Wai - Agilent Technologies N1996A-503 User Reference

Wait-to-Continue
This command causes the instrument to wait until all overlapped commands are
completed before executing any additional commands. There is no query form for the
command.
Mode
Remote Command
Example
Restrictions and Notes
SCPI Status Bits/OPC
Dependencies
Chapter 7
IEEE and STATus Commands (Remote Commands Only)
All modes

*WAI

INIT:CONT OFF; INIT;*WAI Sets the instrument to single
sweep. Starts a sweep and waits for its completion.
See related key System, Service
Not global to all remote ports or front panel. *WAI only
considers operation that was initiated on the same port as
the *WAI command was issued from.
Wait-to-Continue
351