Agilent Technologies N1996A-503 User Reference page 189

previous trace data. Pressing the
Max Hold,
causes the trace to be cleared and causes the
Key Path:
Repeat Sets averaging to the repeat function. Repeat averaging updates the trace after the
selected number of sweeps has been averaged. It is not updated again until the next set of
data from the Avg Number of sweeps has been collected.
Key Path:
Repeat Max Hold Sets averaging to repeat with max hold function. Repeat with max hold
captures and holds the highest magnitude data at the end of each sweep count. Repeat
with max hold updates the trace after the selected number of sweeps has been made. It is
not updated again until the next set of data from the Avg Number of sweeps has been
collected.
Key Path:
Avg Number
Sets the number of measurement averages used when calculating the measurement result.
Mode
Preset
Key Path
Clear Calibration
Clear Calibration deletes the current calibration data.
Mode
Key Path
Chapter 3
Max Hold
key for the selected trace sets the trace type to
Meas setup, Avg Mode, Max Hold
Meas setup, Avg Mode, Repeat
Meas setup, Avg Mode, Repeat Max Hold
Stimulus / Response
4
Meas Setup, Avg Number
Stimulus / Response
Meas Setup, Clear Calibration
One Port Insertion Loss Measurement
Max Hold
sequence to be restarted.
Mode
189