Agilent Technologies N1996A-503 User Reference page 201

Display Show/Blank
This key lets you make a trace visible or not. In
printouts but are otherwise unaffected. They may be queried and markers may be placed
on them.
Note that the action of putting a trace in
restart averaging or hold functions for any traces.
Dependencies / Couplings
Remote Command Notes
Preset
State Saved
Key Path
View/Display
View/Display
The following
The measurement must already be running to access these keys. Press
Insertion Loss
to turn on the measurement.
Mode
Key Path
Avg Insertion Loss
Sets the Average Insertion Loss setting to either On or Off.
Mode
Range
Key Path
Chapter 3
Blank
Blank
does not restart the sweep and does not
• Setting the trace type (even to the type it was already in) puts
Show
the trace in
• Loading a trace from a file puts that trace in
the state it was in when it was saved.
Display On = Show, Display Off = Blank
Show Blank
for Trace 1;
saved in Instrument State
Trace/Detector, Display Show/Blank
keys are for setting up a One Port Insertion Loss measurement.
Stimulus / Response
Front-panel key
Stimulus / Response
On | Off
View/Trace, Avg Insertion Loss
One Port Insertion Loss Measurement
, traces do not display nor appear on
Show
for 2
Meas
Mode
regardless of
One Port
,
201