Mode
Occupied Bandwidth Measurement
Span: Center
Sets the frequency span for the center segment of the currently selected limit mask. This key is only
available when Center has been selected with the Segment key.
Mode
Remote Command
Example
Notes
Preset
State Saved
Min
Max
Key Path
Default Unit
1st Segment
Sets the state of the first segment to On or Off. This key is available only when
Segments
with the
key.
Mode
Remote Command
Example
Notes
112
SA
:CALCulate:OBWidth:LMASk[1]|2:SEGMent:CENTer:SPAN
<frequency>
:CALCulate:OBWidth:LMASk[1]|2:SEGMent:CENTer:SPAN?
:CALC:OBW:LMAS1:SEGM:CENT:SPAN 1.75 MHz
Key is only displayed when the selected segment is Center.
Not affected by a preset but set per default to 2 MHz after a
power cycling
Saved in instrument state.
0 Hz
6 GHz
Meas Setup, Limit Masks, Limit Mask 1, Center Segment Span
Hz
SA
:CALCulate:OBWidth:LMASk[1]|2:SEGMent:FIRSt
ON|OFF|1|0
:CALCulate:OBWidth:LMASk[1]|2:SEGMent:FIRSt?
:CALC:OBW:LMAS1:SEGM:FIRS ON
Key is only displayed when the selected segment is 1
1st
has been selected
st
.
Chapter 3