Agilent Technologies N1996A-503 User Reference page 127

2 Primary Channel
Frequency Error
3–7 Low Adjacent
Channel Powers
8–12 High Adjacent
Channel Powers
13 Primary Channel
Center Frequency
14 Primary Channel
Width
15 Primary Channel
Measurement Time
16 Adjacent Channel
Width
17 Adjacent Channel
Offset
18 Adjacent Channel
Step Size
19 Adjacent Channel
Count
20 Adjacent Channel
Measurement Time
21 Attenuation
22 Average Type
23 Num Averages
Chapter 3
Adjacent Channel Power—ACP (I&M) Measurement
Frequency error (in Hz) for the
requested primary channel.
The powers (in dBc) for the "low" side
adjacent channels. The first Adjacent
Channel Count entries are used.
Unused channels will contain the value
9.91E37.
The powers (in dBc) for the "high" side
adjacent channels. The first Adjacent
Channel Count entries are used.
Unused channels will contain the value
9.91E37.
Center frequency (in Hz) for the
primary channel
Width of the primary channel in Hz
Time (in seconds) over which to
calculate channel power for the primary
channel
Width of the adjacent channels in Hz
st
Offset (in Hz) of the 1 adjacent
channel center frequency from the
primary channel's center frequency
In Hz, the step between adjacent
channels
Number of high and low adjacent
channel pairs to measure. Example:
value of 1 means measure the 1
and Low adjacent channels
Time (in seconds) over which to
calculate channel power for the adjacent
channels
Power offset for RF INPUT attenuation
(dB)
0 = no averaging
1 = exponential average
2 = max hold
3 = repeat average
4 = repeat max
Number of averages
Mode
st
High
127