Mode
Meas Off (Spectrum Analyzer) Measurement
Meas Off (Spectrum Analyzer) Measurement
To configure measurement settings, select
Control/Sweep
enables you to restart a measurement. Refer to the
page
98.
Meas Off Measurement Description
This key accesses the core spectrum analysis measurement functionality and turns off the
current one-button measurement. With this key selected, you will have access to the
measurement setup functionality for the Spectrum Analyzer measurement.
Mode
Remote Command
Example
State Saved
Remote Command
Notes
Key Path
AMPTD Y Scale
Activates the reference level function, and accesses the amplitude menu keys. The
amplitude menu keys set functions that affect the way data on the vertical axis is
displayed or corrected.
Mode:
Key Path
Autoscale
Executes an automatic scaling of the
is a front-panel only function and has no SCPI command.
Mode
30
Meas Off
Spectrum Analyzer
:CONFigure:SANalyzer
CONF:SAN selects the Spectrum Analyzer measurement.
Saved in instrument state.
You must be in the Spectrum Analysis mode to use this command.
Use INSTrument:SELect SA to set the mode.
Meas, Meas Off
SA
Front-panel key
Reference Level
SA
Meas Setup
and then press
"Control/Sweep" on
Scale/Div
, and the
settings. Autoscale
. Pressing
Chapter 3