Cls - Agilent Technologies N1996A-503 User Reference

IEEE and STATus Commands (Remote Commands Only)
Clear Status
Clear Status
Clears the status byte register. It does this by emptying the error queue and clearing all
bits in all of the event registers. The status byte register summarizes the states of the
other registers. It is also responsible for generating service requests.
Mode
Remote Command
Example
Remote Command Notes
SCPI Status Bits/OPC
Dependencies
344
All modes

*CLS

*CLS Clears the error queue and the Status Byte Register.
For related commands, see the SYSTem:ERRor[:NEXT]?
command. See also the STATus:PRESet command and all
commands in the STATus subsystem.
Resets all bits in all event registers to 0, which resets all the
status byte register bits to 0 also
Chapter 7