Calculate:lmask[1]|2:Segment:center:level <Ampl; Calculate:lmask[1]|2:Segment:center:level; Calculate:lmask[1]|2:Segment:center:span <Frequency; Calculate:lmask[1]|2:Segment:center:span - Agilent Technologies N1996A-503 User Reference

Dependencies /
Couplings
Preset
State Saved
Range
Key Path
Level: Center
Sets the power level for the center segment of the current selected limit mask. This key is available
only when Center has been selected with the Segments key.
Mode
Remote Command
Example
Notes
Dependencies /
Couplings
Preset
State Saved
Key Path
Default Unit
Span: Center
Sets the frequency span for the center segment of the currently selected limit mask. This key is only
available when Center has been selected with the Segment key.
Mode
Remote Command
Chapter 3
If Off no limit mask will be displayed even if the 1
segments are turned On.
If On the center segment is drawn on the display centered
around the current center frequency.
OFF
Saved in instrument state.
On | Off
Meas Setup, Limit Masks, Limit Mask 1, Center Segment
SA
:CALCulate:LMASk[1]|2:SEGMent:CENTer:LEVel <ampl>

:CALCulate:LMASk[1]|2:SEGMent:CENTer:LEVel?

:CALC:LMAS2:SEGM:CENT:LEV –20.0 dBm
Key is only displayed when the selected segment is Center.
Value is displayed on the key in the currently selected Y Axis
Unit.
–10.0 dBm
Saved in instrument state.
Meas Setup, Limit Masks, Limit Mask 1, Center Level
dBm
SA

:CALCulate:LMASk[1]|2:SEGMent:CENTer:SPAN

<frequency>
:CALCulate:LMASk[1]|2:SEGMent:CENTer:SPAN?
Meas Off (Spectrum Analyzer) Measurement
st nd
or 2
Mode
63