Agilent Technologies N1996A-503 User Reference page 168

Mode
Two Port Insertion Loss Measurement
Segment (Center, 1st or 2nd)
Selects the Center , 1st or, 2nd
updated to show the span and level settings available for the currently selected segment
Mode
Dependencies /
Couplings
Preset
State Saved
Range
Key Path
Center Segment
Segments
(Center) Sets the state of the center segment to On or Off. This key is available only when Center has
been selected with the Segments key.
Notes
Dependencies /
Couplings
Preset
State Saved
Range
Key Path
Level: Center
Sets the power level for the center segment of the current selected limit mask. This key is available only when
Center has been selected with the Segments key.
Mode
Restrictions and Notes
Preset
168
segment for limit mask 1 or 2. With each segment setting, the
Stimulus / Response
Key menu structure is dependant on selected segment.
Center
Saved in instrument state.
Center | 1st | 2nd
Meas Setup, Limits, Limit Masks, Limit Mask 1, Segment (Center, 1st
or 2nd)
Key is only displayed when the selected segment is Center
If Off no limit mask will be displayed even if the 1
segments are turned On.
If On the center segment is drawn on the display centered
round the current center frequency.
OFF
Saved in instrument state.
On | Off
Meas Setup, Limits, Limit Masks, Limit Mask 1, Center Segment
Stimulus / Response
Key is only displayed when the selected segment is Center.
Not affected by a preset but set per default to 0 dB after a power
cycling
Limits menu is
st nd
or 2
Chapter 3