Agilent Technologies N1996A-503 User Reference page 263

Save Now
Executes the save function. When the save is complete, the message XXXXXX file saved
(where XXXXXX is the filename) will appear on your display. If you have previously used
Save Save Now
the , keys to setup and save a file,
of your file in the same format and to the same location.
For example, if you use the Save menu to configure the analyzer to save Screen in reverse
bitmap format on the selected storage device, using the automatically generated file name
(Screen_20051215_143240.png), then every time the
screen image will be saved in a .png format, and the filename will be incremented
(Screen_20051215_143240.png, Screen_20051215_143357.png). This provides a
convenient format for saving several files with the same format quickly. For more
information on file naming, refer to
NOTE
In the event that a valid save cannot be performed because a location
has not been selected, the
selected. In this case, press
NOTE
Never remove the external memory media during a save operation. To
do so could corrupt all data on the memory media.
Mode
Remote Command
Example
Chapter 4
Save Now
Save Now
"Name" on page 268.
Save Now
key will report the error No location
Save Location
,
SA, Stimulus/Response
:MMEMory:STORe:SCReen <'file_name'>
:MMEMory:STORe:STATe 1,<'file_name'>
:MMEMory:STORe:TRACe <label>,<'file_name'>
MMEM:STOR:STAT 1, 'C:/MyTrace.trc' saves the current
instrument state to the specified file name. The .sta extension
is required.
MMEM:STOR:SCR , 'E:/MyScreen.png' The file must have
a .png file extension. The specified file extension determines
which file format the instrument will use to save the image.
MMEM:STOR:TRAC TRACE3,'C:/MyTrace.trc' Saves trace 3
to the trace + state file MyTrace.trc
Utility and Control/Sweep Functions
Utility Functions
will perform an immediate save
menu key is pressed, a
and select storage location.
263