Calculate:lmask[1]|2:Second:segment:right:level <Ampl; Calculate:lmask[1]|2:Second:segment:right:level - Agilent Technologies N1996A-503 User Reference

Mode
Meas Off (Spectrum Analyzer) Measurement
Default Unit
Level: 2nd Segment Right
Sets the power level, for the 2
nd
2
available when has been selected with the
Mode
Remote Command
Example
Notes
Dependencies /
Couplings
Preset
State Saved
Key Path
Default Unit
Sensitivity
The sensitivity setting changes how the auto-range algorithm is applied to input signals.
The default setting is High, which optimizes dynamic range but may introduce distortion
with large signal levels. Setting sensitivity to Low removes signal distortion, but may
decrease dynamic range.
Mode
Remote Command
Preset
Range
Key Path
70
dB
nd
segment to the Right of the Center segment. This key is only
Segments
SA

:CALCulate:LMASk[1]|2:SECond:SEGMent:RIGHt:LEVel

<ampl>
:CALCulate:LMASk[1]|2:SECond:SEGMent:RIGHt:LEVel?
:CALC:LMAS:SEGM:SEC:RIGH:LEV –39 dBm
Key is only displayed when the selected segment is 2
selected segment side is Right.
Value is displayed on the key in the currently selected Y Axis
Unit.
Not affected by a preset but set per default to –20 dBm after a
power cycling.
Saved in instrument state.
Meas Setup, Limit Masks, Limit Mask 1, 2nd Segment: Right, Level
dBm
SA
[:SENSe]:POWer:SENSitivity LOW|HIGH
[:SENSe]:POWer:SENSitivity?
High
Low | High
Meas Setup, Sensitivity
key.
nd
, and the
Chapter 3