Agilent Technologies N1996A-503 User Reference page 141

Cancel Aborts the selected channel (radio) standard as the standard for the measurement.
Mode
Key Path
Format List Opens a table with a list of available channel formats such as CDMA Cellular,
CDMA PCS, and W-CDMA (UMTS). The current format is highlighted. This enables you to
decouple the default formats from the channel standard by selecting one of the available
ACP formats. When you set one of the listed ACP formats, new parameter values are set
that are different from the channel (radio) standard default values. You must use the up
and down arrow navigation keys to select the standard you want and then use the
key to set the standard. To abort your selection, use the
Choose a new format with the arrow keys, then press
Mode
Dependencies /
Couplings
Key Path
Select Sets the selected ACP format as the default parameters for the measurement. The different
Formats available are:
CDMA Cellular BTS IS95A | CDMA Cellular BTS IS95C BC0 | CDMA PCS BTS IS95C BC1 |
CDMA PCS J-STD-008 | W-CDMA | GSM/EDGE/GPRS | TDMA North America | iDEN–800 |
iDEN–900 | AMPS North America | NMT–450 | Tetra
Mode
Key Path
Cancel Aborts the selected ACP format as the default parameters for the measurement.
Mode
Key Path
Chapter 3
Channel Analyzer
Meas Setup, Format/BW, Chan Std (Radio Std), Cancel
Channel Analyzer
Format Type must be set to List
Meas Setup, Format/BW, Format List
Channel Analyzer
Meas Setup, Format/BW, Format List, Select
Channel Analyzer
Meas Setup, Format/BW, Format List, Cancel
Adjacent Channel Power—ACP (I&M) Measurement
Cancel
key.
Select
to change the format.
Mode
Select
141