Agilent Technologies N1996A-503 User Reference page 178

Mode
Two Port Insertion Loss Measurement
Peak Search
Accesses the marker peak functions and places a marker on the highest peak of the
currently selected trace.
Mode
Remote Command
Example
Key Path
Next Peak
Places the selected marker on the next highest signal peak from the current marked peak.
Mode
Remote Command
Example
Key Path
Source
Sets the RF power output level of the internal instrument source
Mode
Remote Command
Restrictions and Notes
178
SR
:CALCulate:TPILoss:MARKer[1]|2:MAXimum
:CALC:TPIL:MARK2:MAX
Front-panel key
SR
:CALCulate:TPILoss:MARKer[1]|2:MAXimum:NEXT
CALC:TPIL:MARK2:MAX:NEXT
Peak Search, Next Peak
Stimulus / Response
:SOURce:TPILoss:POWer[:LEVel][:IMMediate][:AMPLitude]
<power>
:SOURce:TPILoss:POWer[:LEVel][:IMMediate][:AMPLitude]
?
:SOURce:TPILoss:POWer[:LEVel][:IMMediate][:AMPLitude]
:AUTO OFF|ON|0|1
:SOURce:TPILoss:POWer[:LEVel][:IMMediate][:AMPLitude]
:AUTO?
The range of settable power values depends on the Agilent CSA
model. Using the Source in Auto mode will automatically check if
the actual power level is achievable for the frequency range set
for the measurement.
Chapter 3