Agilent Technologies N1996A-503 User Reference page 193

Dependencies /
Couplings
Preset
State Saved
Range
Key Path
1st Segment (Left or Right Limits)
1st Segment
Sets to allow definition of the limits Left or Right of the center segment. The Left or Right
amplitude limits can be changed with the
Span
limits menu key. This key is only available when
Mode
Notes
Preset
State Saved
Range
Key Path
Level: 1st Segment Left
Sets the power level, for the 1
Segments
has been selected with the
Chapter 3
nd
If Off the 2 limit mask segment will not be displayed even if
turned On.
If On and the Center segment is On:
st
The left hand side 1
the center segment at the specified power level
The right hand side 1
of the center segment at the specified power
For both left and right 1
nd
If the 2 segment is Off the 1
limit mask span is equal to the current frequency span.
nd
If the 2 segment is On the left and right 1
specified span values.
Off
Saved in instrument state.
On | Off
Meas Setup, Limits, Limit Masks, Limit Mask 1, 1st Segment
Level key. The Left or Right span limits can be changed with the
1st
Stimulus / Response
Key is only displayed when the selected segment is 1
Not affected by a preset but set per default to Left after a power
cycling
Saved in instrument state.
Left | Right
Meas Setup, Limits, Limit Masks, Limit Mask 1, 1st Segment (Left or
Right Limits)
st
segment to the Left of the Center segment. This key is only available when
key.
One Port Insertion Loss Measurement
segment is drawn to the left hand side of
st
segment is drawn to the right hand side
st
segments when On
st
segment extends so the total
st
segments use the
Segments
has been selected with the
Mode
key.
st
.
1st
193