Agilent Technologies N1996A-503 User Reference page 282

Utility and Control/Sweep Functions
Utility Functions
30 min., 45 min., or 60 min.
Mode
Preset
State Saved
Range
Key Path
Screen Save (Ext DC) Displays the table used to set the screen saver function to active and the
time delay before the screen saver activates. You use this key to set the time delay when you are
operating the analyzer on external DC power supply. You can set Screen Save to Disabled, or to
enabled with time intervals of 15 s., 30 s., 1 to 5 min. (in 1 min. intervals), 10 min., 15 min., 30 min.,
45 min., or 60 min.
Mode
Preset
State Saved
Range
Key Path
System Stats
Displays the System Stats menu that enables you to View the following analyzer System
Statistics:
• Check analyzer system software version
• Check analyzer memory size and availability
• Check analyzer battery status
• Verify copyrights
Mode
Key Path
282
All
Not affected by Preset.
Survives Preset and power cycle, but not saved in Instrument
State.
15 s., 30 s., 1 min., 2 min., 3 min., 4 min., 5 min., 10 min., 15 min.,
30 min., 45 min., or 60 min., Disabled
System, Control, Display Settings, Screen Save (Battery)
All
Not affected by Preset.
Survives Preset and power cycle, but not saved in Instrument
State.
15 s., 30 s., 1 min., 2 min., 3 min., 4 min., 5 min., 10 min., 15 min.,
30 min., 45 min., or 60 min., Disabled
System, Control, Display Settings, Screen Save (Ext DC)
All
System, System Stats
Chapter 4