Agilent Technologies N1996A-503 User Reference page 343

IEEE and STATus Commands
7
(Remote Commands Only)
Numeric values for bit patterns can be entered using decimal or hexadecimal
representations. (i.e. 0 to 32767 is equivalent to #H0 to #H7FFF).
IEEE Standard Commands:
*CLS, *ESE, *ESE?, *ESR?, *RCL, *SAV, *SRE, *SRE?, *STB?,
*IDN?, *RST, *TRG, *TST?, *OPC, *OPC?, *OPT?, *WAI
Some of the above commands are documented in other sections:
*RCL, *SAV - Recall/Save
*TRG - Trigger
*RST, *OPT?, *TST?, *IDN? - System/Preset
STATus Commands:
STATus:PRESet
STATus:QUEStionable register commands
STATus:QUEStionable:FREQuency register commands
STATus:QUEStionable:INTegrity register commands
343