Agilent Technologies N1996A-503 User Reference page 166

Mode
Two Port Insertion Loss Measurement
Example
Key Path
Avg Number
Sets the number of measurement averages used when calculating the measurement result.
Mode
Remote Command
Example
Preset
Min
Max
Key Path
Clear Normalize
Clear Normalize deletes the current normalization data.
Mode
Remote Command
Notes
Key Path
Limits
Access the limit mask keys. You can define a limit mask that matches your maximum or
minimum measurement requirements. This mask can then be compared with the
measured trace data to determine pass/fail conditions.
166
TPIL:AVER:TCON RMAX
Meas setup, Avg Mode, Repeat Max Hold
Stimulus / Response
[:SENSe]:TPILoss:AVERage:COUNt <integer>
[:SENSe]:TPILoss:AVERage:COUNt?
TPIL:AVER:COUN 50
4
0
100
Meas Setup, Avg Number
Stimulus / Response
Front Panel feature only.
There is no remote command to clear the normalization.
Working remotely, you will use the current normalization data.
Or else you must perform another normalization if you do not
want to use the current one.
Meas Setup, Clear Normalize
Chapter 3