Agilent Technologies N1996A-503 User Reference page 160

Mode
Two Port Insertion Loss Measurement
Remote Command
Example
Preset
Key Path
Normal Activates a single marker at the center of the display.
Mode
Example
Key Path
Delta Activates a pair of markers, one of which is fixed at the current marker location. The
other marker can then be moved around on the trace. The marker readout shows the
difference between the two markers.
NOTE
Pressing Delta moves the reference marker to the active marker
position, so you can make delta measurements from differing reference
points without having to turn off the markers and begin again.
Mode
Example
Key Path
Off Turns the selected marker off.
Mode
Example
Key Path
160
:CALCulate:TPILoss:MARKer[1]|2|3|4:MODE
OFF|POSition|DELTa
:CALCulate:TPILoss:MARKer[1]|2|3|4:MODE?
CALC:TPIL:MARK3:MODE DELT selects marker 3 in delta
mode.
NORMal
Marker, Marker Type
SR
CALC:TPIL:MARK2:MODE NORM selects marker 2 in NORM
mode
Marker, Normal
SR
CALC:TPIL:MARK:MODE DELT selects marker 1 in Delta mode
Marker, Delta
SR
CALC:TPIL:MARK2:MODE OFF selects marker 2 and turns it off
Marker, Off
Chapter 3