Agilent Technologies N1996A-503 User Reference page 235

Preset
Min
Max
Key Path
Clear Calibration
Clear Calibration deletes the current calibration data, enabling you to re-calibrate the
instrument for the same frequency range.
Mode
Key Path
Limit Masks
Sets the Limit Masks submenu keys, it is then possible to select to configure either Limit
Mask 1 (Upper) or Limit Mask 2 (Lower).
Mode
Dependencies /
Couplings
State Saved
Key Path
Limit Mask 1 (upper) or Limit Mask 2 (Lower)
Limit Mask 1 (upper) access the upper limit mask keys.
Limit Mask 2 (Lower) access the lower limit mask keys.
You can define a limit mask that matches your maximum or minimum measurement
Chapter 3
4
1
100
Meas Setup, Avg Number
Stimulus / Response
Meas Setup, Clear Calibration
Stimulus / Response
Limit Mask 1
The (Upper) menu link key accesses the keys to
configure the upper limit mask for the Center, 1
segments (dependent on selected segment).
Limit Mask 2
The (Lower) menu link key accesses the keys to
configure the lower limit mask for the Center, 1
segments (dependent on selected segment).
Saved in instrument state.
Meas Setup, Limit Masks, Limit Mask 1
Distance To Fault
st nd
, or 2
st nd
, or 2
or Limit Mask 2
Mode
235