Calculate:lmask[1]|2:Segment:first On|Off|1|0; Calculate:lmask[1]|2:Segment:first - Agilent Technologies N1996A-503 User Reference

Mode
Meas Off (Spectrum Analyzer) Measurement
Example
Notes
Preset
State Saved
Min
Max
Key Path
Default Unit
1st Segment
Sets the state of the first segment to On or Off. This key is available only when
Segments
with the key.
Mode
Remote Command
Example
Notes
Dependencies /
Couplings
Preset
State Saved
Range
64
:CALC:LMAS1:SEGM:CENT:SPAN 1.75 MHz
Key is only displayed when the selected segment is Center.
Not affected by a preset but set per default to 2 MHz after a
power cycling.
Saved in instrument state.
0 Hz
Current measurement span
Meas Setup, Limit Masks, Limit Mask 1, Center Span
Hz
SA

:CALCulate:LMASk[1]|2:SEGMent:FIRSt ON|OFF|1|0

:CALCulate:LMASk[1]|2:SEGMent:FIRSt?

:CALC:LMAS1:SEGM:FIRS ON
Key is only displayed when the selected segment is 1
nd
If Off the 2 limit mask segment will not be displayed even if
turned On.
If On and the Center segment is On:
st
The left hand side 1 segment is drawn to the left hand side of
the center segment at the specified power level.
st
The right hand side 1 segment is drawn to the right hand side
of the center segment at the specified power level.
st
For both left and right 1
nd
If the 2 segment is Off the 1
limit mask span is equal to the current frequency span.
nd
If the 2 segment is On the left and right 1
specified span values.
Off
Saved in instrument state.
On | Off
1st
has been selected
segments when On.
st
segment extends so the total
st
segments use the
st
.
Chapter 3