Agilent Technologies N1996A-503 User Reference page 117

Preset
State Saved
Range
Key Path
2nd Segment (Left or Right Limits)
Sets the 2nd segment to allow definition of the limits Left or Right of the center segment for the 2
Segment. The Left or Right amplitude limits can be changed with the
nd
2
available when has been selected with the
Mode
Notes
Dependencies /
Couplings
Remote Command
Notes
Preset
State Saved
Range
Key Path
Level: 2nd Segment Left
Chapter 3
Off
Saved in instrument state.
On | Off
Meas Setup, Limit Masks, Limit Mask 1, 2nd Segment
Segments
SA
Key is only displayed when the selected segment is 2
The Left span is calculated as follows:
(<maximum span>/2) – (<center segment span>/2) - <first
segment left span>
The Right span is calculated as follows:
(<maximum span>/2) – (<center segment span>/2) - <first
segment right span>
Where <maximum span> is the maximum frequency span of
the instrument (3 GHz or 6 GHz)
The Limit Mask SCPI command syntax uses:
The keyword "LEFT" to define the level and span for the second
segment to the Left of the center segment.
The keyword "RIGHt" to define the level and span for the
second segment to the Right of the center segment.
Not affected by a preset but set per default to Left after a power
cycling.
Saved in instrument state.
Left | Right
Meas Setup, Limit Masks, Limit Mask 1, 2nd Segment (Left or Right
Limits)
Occupied Bandwidth Measurement
Level
key. This key is only
key.
Mode
nd
nd
.
117