Agilent Technologies N1996A-503 User Reference page 39

Center Frequency
Sets the frequency that corresponds to the horizontal center of the graticule.
The SCPI commands only change the Center Frequency for the current application. For
example, in SA mode, the Center Frequency SCPI command only changes the Center
Frequency for SA. No other application mode's Center Frequency will be changed.
Mode
Remote Command
Example
Remote Command Notes
Dependencies / Couplings
Preset
State Saved
Range
Default Unit
Key Path
Channel
Enables you to set the channel value and the channel type. Based on the selected channel
standard, a center frequency is set that corresponds to the horizontal center of the
graticule. The available channel type options are:
Forward (Fwd): the base station is transmitting (downlink)
Reverse (Rev): the mobile is Transmitting (uplink)
Mode
Remote Command
Chapter 3
SA, Channel Analyzer
[:SENSe]:FREQuency:CENTer <freq>
[:SENSe]:FREQuency:CENTer?
FREQ:CENT 50 MHz
FREQ:CENT?
The preset/min/max/range values provided below are valid only
in the Frequency Domain. Time domain (zero span) values will
be different.
Not displayed on front-panel when
1.50005 GHz (Option 503) / 3.00005 GHz (Option 506)
Saved in State
From 0 Hz to 3.0199995 GHz (Option 503) / 6.0199995 GHz
(Option 506)
Hz
Front-panel key
SA, Channel Analyzer
Meas Off (Spectrum Analyzer) Measurement
Units Chan
is set to
Mode
.
39