Agilent Technologies N1996A-503 User Reference page 216

Mode
Return Loss
Dependencies /
Couplings
Preset
State Saved
Min
Max
Key Path
Default Unit
2nd Segment
Sets the state of the first segment to On or Off. This key is available only when 2
Segments key.
Mode
Notes
Dependencies /
Couplings
Preset
State Saved
Range
Key Path
2nd Segment (Left or Right Limits)
Sets to allow definition of the limits Left or Right of the center segment for the 2
amplitude limits can be changed with the
216
st nd
If the Center, 1 , and 2
span adjusts on a change in the right 1
Not affected by a preset but set per default to 2 MHz after a
power cycling
Saved in instrument state.
0 Hz
Frequency Span Setting
Meas Setup, Limit Masks, Limit Mask 1, 1st Segment: Right Span
Hz
Stimulus / Response
Key is only displayed when the selected segment is 2
nd
If Off the 2 limit mask segment will not be displayed even if
turned On.
If On, and the First and Center segments are On:
nd
The left hand side 2 segment is drawn to the left hand side of
the left first segment at the specified power level
st
The right hand side 1 segment is drawn to the right hand side
of the right first segment at the specified power
The segment spans are calculated as documented in section
above
Off
Saved in instrument state.
On | Off
Meas Setup, Limit Masks, Limit Mask 1, 2nd Segment
Level
key. This key is only available when
nd
segments On, the right 2
st
segment span.
nd
has been selected with the
nd
Segment. The Left or Right
nd
2
has been selected with
segment
nd
.
Chapter 3