Agilent Technologies N1996A-503 User Reference page 278

Utility and Control/Sweep Functions
Utility Functions
Controls
Displays the menu keys used to manage the analyzer IP information and setting power
conservation screen save settings.
Mode
Key Path
IP Admin
Displays the menu keys used to manage the analyzer IP information. The spectrum
analyzer can operate as a device on any compatible network. Therefore, in order to be
accessible on the network, certain information must be entered so the analyzer can
communicate with other devices. Configuring the analyzer for network activity is
performed by using the IP administrator.
In order to integrate your analyzer into an existing network that uses DHCP to
dynamically assign an IP address, you must have the System Name (available from your
network administrator).
In order to integrate your analyzer into an existing network that uses a technique other
than DHCP, such as DNS, as its IP address assignments, you must have the following
specific data from the network administrator:
System name
IP address
Net mask
Gateway
For a non-DHCP network, you must specify relevant network information for the network
to recognize your analyzer. Contact your network administrator if you do not have this
information.
Mode
Key Path
Host Name Opens a form that enables you to enter the system name for the network to which you
wish to connect. The system name is available from your network administrator.
278
All
System, Controls
All
System, Control, IP Admin
Chapter 4