Agilent Technologies N1996A-503 User Reference page 81

Dependencies / Couplings
Preset
State Saved
Key Path
Display Show/Blank
This key lets you make a trace visible or not. In
printouts but are otherwise unaffected. They may be queried and markers may be placed
on them.
Note that the action of putting a trace in
restart averaging or hold functions for any traces.
Remote Command
Example
Dependencies / Couplings
Remote Command Notes
Preset
State Saved
Key Path
Chapter 3
Setting the trace type (even to the type it was already in) puts the
Update = On
trace in
Loading a trace from a file makes that trace inactive regardless of
the state it was in when it was saved.
On Off
for Trace 1; for 2–4
Saved in Instrument State
Trace/Detector, Update (View) On/Off
Blank
, traces do not display nor appear on
Blank
does not restart the sweep and does not
:TRACe[1]|2|3|4:DISPlay[:STATe] ON|OFF|1|0
:TRACe[1]|2|3|4:DISPlay[:STATe]?
TRAC2:DISP 1 Makes trace 2 visible
TRAC3:DISP 0 Blanks trace 3, but does not turn off the trace
updating.
• Setting the trace type (even resetting to the same type) puts the
Show.
trace in
• Loading a trace from a file puts that trace in
the state it was in when it was saved.
Display On = Show, Display Off = Blank
Trace 1 is on. Traces 2-4 are blanked.
Saved in Instrument State
Trace/Detector, More 1 of 2, Display Show/Blank
Meas Off (Spectrum Analyzer) Measurement
Show
Mode
regardless of
81