Agilent Technologies N1996A-503 User Reference page 210

Mode
Return Loss
Avg Number
Sets the number of measurement averages used when calculating the measurement result.
Mode
Preset
Min
Max
Key Path
Clear Calibration
Clear Calibration deletes the current normalization data, or to calibrate the analyzer for a
new frequency range.
Mode
Key Path
Limits
Access the limit mask keys. You can define a limit mask that matches your maximum or
minimum measurement requirements. This mask can then be compared with the
measured trace data to determine pass/fail conditions.
Limit Masks
Sets the Limit Masks submenu keys, it is then possible to select to configure either Limit
Mask 1 (Upper) or Limit Mask 2 (Lower).
Mode
Dependencies /
Couplings
210
Stimulus / Response
4
0
100
Meas Setup, Avg Number
Stimulus / Response
Meas Setup, Clear Calibration
Stimulus / Response
The Limit Mask 1 (Upper) menu link key accesses the keys to
configure the upper limit mask for the Center, 1
segments (dependent on selected segment).
The Limit Mask 2 (Lower) menu link key accesses the keys to
configure the lower limit mask for the Center, 1
segments (dependent on selected segment).
st nd
, or 2
st nd
, or 2
Chapter 3