Calculate:lmask[1]|2:Segment:second On|Off|1|0; Calculate:lmask[1]|2:Segment:second - Agilent Technologies N1996A-503 User Reference

Mode
Meas Off (Spectrum Analyzer) Measurement
2nd Segment
Sets the state of the first segment to On or Off. This key is available only when 2
selected with the Segments key.
Mode
Remote Command
Example
Notes
Dependencies /
Couplings
Preset
State Saved
Range
Key Path
2nd Segment (Left or Right Limits)
Sets 2nd segment to allow the definition of the limits Left or Right of the center segment for the 2
Segment. The Left or Right amplitude limits can be changed with the
nd
2
available when has been selected with the
Mode
Notes
68
SA

:CALCulate:LMASk[1]|2:SEGMent:SECond ON|OFF|1|0

:CALCulate:LMASk[1]|2:SEGMent:SECond?

:CALC:LMAS1:SEGM:SEC ON
Key is only displayed when the selected segment is 2
If On, and the First and Center segments are On:
nd
The left hand side 2 segment is drawn to the left hand side of
the left first segment at the specified power level
st
The right hand side 1 segment is drawn to the right hand side
of the right first segment at the specified power level
Off
Saved in instrument state.
On | Off
Meas Setup, Limit Masks, Limit Mask 1, 2nd Segment
Segments
SA
Key is only displayed when the selected segment is 2
nd
Level
key. This key is only
key.
has been
nd
.
nd
nd
.
Chapter 3