Agilent Technologies N1996A-503 User Reference page 159

Mode
Remote Command
Example
Remote Command
Notes
Key Path
Marker
Accesses the marker selection and settings functions.
Mode
Key Path
Marker
Selects one of four possible markers. A marker that has already been turned on will
become active when it is selected. If a marker has been turned on and assigned to a specific
trace, it will become active on that trace if that marker is selected.
Mode
State Saved
Key Path
Marker Type
Mode
Chapter 3
Stimulus / Response
:CALCulate:TPILoss:NORMalize[:IMMediate]
CALC:TPIL:NORM
In Two Port Insertion Loss, pressing the Normalized button will
take a sweep, and after the user finished with the
"Normalization screen", the analyzer will do another sweep to
complete the normalization process.
Remotely, sending the "normalize" command will notify the
analyzer to do the correct thing. The "Normalization Screen"
will not be displayed, the normalization process will start
immediately.
FREQ/Channel, Normalize
SR
Front-panel key
SR
Saved in State
Marker, Marker 1 2 3 4
SR
Two Port Insertion Loss Measurement
Mode
159